CLEANDRIVE® MOTO - ADVANCED FUEL & EXHAUST SYSTEM CLEANER FOR MOTORBIKES
CleanDrive® is scientifically proven to enhance the fuel efficiency and overall performance of any motorbike by improving the combustion process and fuel efficiency of the engine.
Improves fuel efficiency (MPG) up to 15%
Use before an MOT to improve emission test results
Brings the motorbike back to the manufacturer’s design point
Lubricates engine walls
Cleans the catalytic converter (CAT) and Lambda sensor
Cleans EGR valves, inlet valves and fuel injectors
Removes carbon deposits from exhaust valves
Prevents loss of power by cleaning the entire fuel system
Restores engine performance
Reduces maintenance costs
Reduces harmful emissions up to 60%
Apply only once every 3,000 miles
Specification
For all motorbike engines
Made and tested in the UK
Size: 250ml
Part No: ECD250
Application
1. Check you have at least 1/4 tank of fuel.
2. Add entire CleanDrive bottle into the fuel tank, ride as normal.
3. Wait for Fuel Warning Light to come on before refuelling. After that, refuel as normal.
For best results, use CleanDrive® once every 3,000 miles.
Yes. CleanDrive has been extensively tested and is safe for use in diesel, petrol and hybrid engines.
HOW HAS CLEANDRIVE BEEN TESTED?
CleanDrive has been tested by the University of Leicester on a test protocol adapted from the New European Drive Cycle (NEDC) on a bench dynamometer under controlled laboratory conditions. It has also undergone public trials. In all tests, it has been shown to improve fuel efficiency, cut costs and reduce harmful emissions.
HOW CAN CLEANDRIVE BENEFIT VEHICLES, CARS, TRUCKS AND BUSES?
CleanDrive provides significant benefits to all kinds of vehicles and engines, including hybrid engines. This is because it cleans the fuel pump, the connecting pipeline, the common rail, the injectors, Diesel Particulate Filter, the Catalytic converter and lubricates the engine wall. The clean fuel system delivers a more regular better atomized fuel spray, improving the combustion process and engine fuel efficiency. Engines cleaned by CleanDrive have a proven, measurable improvement in their performance and a boost in fuel efficiency.
HOW OFTEN SHOULD I USE CLEANDRIVE?
You only need to add CleanDrive to your fuel tank once every three months However, if your vehicle does a lot of stops and starts or minimal motorway miles, you may benefit from adding it every 60 days.
HOW CAN I MAXIMISE THE RESULTS OF CLEANDRIVE?
Just follow these simple instructions:
1. Check you have ¼ of a tank of fuel in your tank (3-4 gallons)
2. Drive for a few miles to allow your vehicle to reach optimal temperature before adding CleanDrive
3. Add the entire contents of bottle into the fuel tank, drive normally for about 6 miles
4. Enjoy more fuel efficient and cost effective driving and a lower impact on the environment.
WE HAVE MUCH CLEANER FUELS TODAY. WHY SHOULD I WANT TO USE AN ADDITIVE?
By comparison, fuels today are much cleaner than fuels sold about 15-20 years ago. However, today’s fuels are less stable because they are produced through cracking process versus the less efficient “straight run” process used years ago. As a result, today’s fuels deteriorate at much faster Rates- resulting in excessive carbon build-up in your engine.
IS IT COST EFFECTIVE TO USE CLEANDRIVE?
Because the use of CleanDrive results in more efficient combustion, fuel economy is greatly improved. The fuel savings more than pays for the cost of treatment. In the long-term, the capability of CleanDrive to prevent carbon deposits actually extends the life of a engine. – Because it is the hard carbon which accelerates abrasion and wear.
ARE ALL FUELS ESSENTIALLY THE SAME?
No, even when processed by the same refiner, fuel quality can vary considerably day-to-day depending on the crude oil feedstock used and the processing controls implemented at the refinery.
I HAVE ABOUT 100,000 MILES ON MY ENGINE. IS IT TOO LATE TO START USING CLEAN DRIVE TO PREVENT WEAR?
No, CleanDrive can add years to “middle-aged” engines by stopping excessive wear and carbon build-up.
I HAVE BEEN USING CLEANDRIVE FOR MANY MONTHS WITH GOOD RESULTS.
HOWEVER, THIS SUMMER CLEANDRIVE DOESN’T SEEM TO BE GIVING ME THE
FUEL ECONOMY I USUALLY GET?
There could be two reasons why you are not achieving the results to their optimum levels :
1.Gasoline expands in hotter weather and fuel economy drops.Without CleanDrive you can
expect an even greater fuel economy loss. 2. Engines work harder in the summer, operating under
higher heat levels whilst providing horsepower to run air conditioning units. CleanDrive helps
improve fuel combustion and efficiency when your engine needs it most.
